![]() However, please pay attention to the specific needs of each project and their limitations. The general rule of thumb is to try to achieve 100 lux at floor level with good flow of light along the corridor. Step 4 Once the stairs have been created successfully inside the Dialux room, with their proper dimensions and orientation, the next step is to insert calculation surfaces, one per different area of the stairs. Step 3 Choose which way you’ll create the stairs inside Dialux, either by using the embedded object of stairs and modifying it or by using the 3DS object coming from Revit. Please, remember that Revit uses millimetres and Dialux uses meters for conversion. In the sketches on the right, you may find the relevant dimensions with blue arrows. The height of the room would be nice to have, depending on the purposes of the lighting design and the designer’s approach. From the Section in Revit, measure the height of the stairs and the height of the room that includes the stairs. ![]() Step 2 From the floor plan, measure the Width and Length of the area. On the right page, you could get some ideas about the different types of stairs and the relevant section. The steps to create the object of Stairs in Dialux are common: Step 1 Draw a mini sketch of the floor plan and a section of the stairs, so you can identify the type of stairs and the dimensions needed for Step 2. There are several types of stairs, depending on the project. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |